蜗杆砂轮磨削斜齿轮时的构型原理及误差特征

PDF(420 KB)

大连民族大学学报 ›› 2014, Vol. 16 ›› Issue (5) : 517-519.

机电与自动化

蜗杆砂轮磨削斜齿轮时的构型原理及误差特征

李文龙^¹, 胡红英^¹, 邵强^¹, 刘健^²

作者信息 +

Shaping Principle and Error Characteristics of Helical Gear Tooth Surfaces Grinded with a Worm Wheel Grinding Machine Tool

LI Wen-long^¹, HU Hong-ying^¹, SHAO Qiang^¹, LIU Jian^²

Author information +

History +

摘要

渐开线螺旋面是工程上广泛应用的廓面之一,其上存在四族特征线:渐开线、螺旋线、直母线及接触迹。基于渐开线螺旋面上的特征线族,研究了蜗杆砂轮磨齿机磨削渐开线斜齿轮廓面的构型原理,并进行了误差特征分析。

Abstract

An involute helical surface is one of the widely used surfaces in engineering. There are four groups of characteristic lines (i.e., involute, helix, straight generatrix and contact trace) on involute helical surfaces. In the basis of characteristic line groups, the shaping principle of helical involute surfaces grinded with a worm wheel grinding machine tool is studied. And error characteristics are analyzed.

导出引用

李文龙, 胡红英, 邵强, 刘健. 蜗杆砂轮磨削斜齿轮时的构型原理及误差特征. 大连民族大学学报. 2014, 16(5): 517-519

LI Wen-long, HU Hong-ying, SHAO Qiang, LIU Jian. Shaping Principle and Error Characteristics of Helical Gear Tooth Surfaces Grinded with a Worm Wheel Grinding Machine Tool. Journal of Dalian Minzu University. 2014, 16(5): 517-519

参考文献

[1] 遇立基. 磨齿工艺与磨齿机的技术发展概况[J].现代制造工程,2008(2):1-4.

[2] 李文龙, 胡红英, 魏莉, 等. 锥面砂轮磨齿机磨削斜齿轮时的构形原理及其误差特征[J].大连民族学院学报,2012,14(5):453-455.

[3] LI Wenlong, WEI Li, HE Shaojun. Shaping principle in hobbing and Analysis on Errors of Involute Gear Tooth Surfaces[J]. Advanced Materials Reseach. 2011.2(189-193): 4173-4176.

[4] LI WenLong, WEI Li, HU Hongying, et al. Analysis on Characteristics of Minor Cycle Errors in Process of Grinding Involute Gears on Worm Wheel Gear Grinding Machine[J]. Advanced Materials Research 2013,706-708 : 1209-1212.

PDF(420 KB)

4867

Accesses

Citation

Detail

段落导航

摘要
Abstract
关键词
Key words
引用本文
参考文献

Received	Revised	Published
2016-07-13	2016-07-13	2014-09-20
Issue Date
2016-07-13

选择文件类型/文献管理软件名称

选择包含的内容

摘要

Abstract

关键词

Key words

引用本文

{{custom_sec.title}}

{{custom_sec.title}}

参考文献

{{custom_fnGroup.title_cn}}

脚注